Hitachi GX1000-SMC013X Instruction Manual page 302

show ip route
Description
This command displays IPv4 address routes.
Input mode
SP user mode and SP administrator mode
Syntax
[{connected|dep|kernel|static|A.B.C.D|A.B.C.D/M|supernets-only}]
Parameters
When this parameter is omitted:
The command displays all routes.
connected
Displays the directly connected routes.
dep
Displays the routes acquired from DEP.
kernel
Displays the routes added by external modules.
static
Displays static routes.
. . .
A B C D
Displays the route to a host specified by using the IPv4 address.
. . .
A B C D
Displays the route to a network specified by using an IPv4 address.
supernets-only
Displays class-based IPv4 routes.
Display example:
SP01> show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP, O - OSPF,
I - ISIS, B - BGP, D - Delegated Prefix, > - selected route,
>* - FIB route, b - Backup route, < - delayed route, Q - Untyped route, M - SMR
C>* 127.0.0.0/8 is directly connected, lo
C>* 172.32.202.0/24 is directly connected, bnet0
SP01>
(1) Code, gateway address, route status, and interface name
Notes
None
302
/
M