Use Of External Touchscreen Monitors - Veripos LD6 Operation Manual

LD6 Operation
For information relating to restoring LD6 configuration files on to an LD6, please contact
the VERIPOS Helpdesk.
Configuration backups can only be restored on an LD6 running on the same software
version as that which the backup configuration was created from.
2.14

Use of External Touchscreen Monitors

A touchscreen monitor can be connected to the LD6. The VERIPOS Orion software can
then be operated using the touchscreen monitor.
Verify QC is not designed to be operated via touchscreen therefore a keyboard and
mouse will be required for operation and configuration of Verify QC.
Touchscreen monitors require both VGA and USB connection to the LD6. VERIPOS
recommend the use of USB 2.0 cables, up to a maximum length of 5 metres.
The LD6 supports the use of NORCO and HATTELAND touchscreen monitors. Refer to
Section 2.11.5 for information on touchscreen display configuration.
LD6 (Version 8 & Version 50) Operations Manual
64(85)