Module Reboot; Factory Reset; Hints - Veripos LD6 Operation Manual

2.6.3.3 Event marker
The event marker function is not implemented on the LD6.
2.6.4

Module Reboot

This will perform a reboot on the GNSS module without rebooting other modules
and the full LD6 system. If using this function it will then lead to all position
calculations being reset.
2.6.5

Factory Reset

Use only under instruction from a VERIPOS engineer. This feature is password
protected.
2.6.6

Hints

Shows where to locate further reference information from.
LD6 (Version 8 & Version 50) Operations Manual
LD6 Operation
29(85)