Veripos LD6 Operation Manual page 16

LD6 Operation
NOTE
Previously, a GA-530 GNSS antenna may have been supplied if Glonass was not
required. The V460 is the standard antenna currently supplied for GNSS signals on an
LD6 regardless of whether Glonass is required or not.
The Video out connection is only used with Verify-QC and Orion software
If using a combined L-Band / GNSS antenna (e.g. V460) connect it to the input to the
L-Band receiver card. Remove the terminator from the RF out of the L-Band card and
link the GNSS card RF in to the L-Band RF out connector, using the lead which is
supplied.
LD6 with Combined GNSS/L-Band antenna and link cable connected
Figure 5
LD6 (Version 8 & Version 50) Operations Manual
15(85)