Veripos LD6 Operation Manual page 57

LD6 Operation
Press Next and use the Arrows to select the data streams to output to this port.
Where multiple LD6 outputs of the same device/data stream are required, it is only
necessary to assign the same data stream to ports. Each port may use a different
protocol.
Any External RTCM input data is made available to the LD6 internal calculations. The
RTCM external data is also available on the Ethernet connection for use e.g. in Verify QC.
LD6 (Version 8 & Version 50) Operations Manual
56(85)