Config - Veripos LD6 Operation Manual

LD6 Operation
Position Info
Shows current Lat, Long, Height and a Course reading for the solution that is being
output.
DOP Values
Values are shown for HDOP, PDOP and VDOP
DOP Mask Values
The HDOP, PDOP and VDOP Mask values are displayed.
Max Values
The maximum age for service being used, the maximum range to a station for usage (if
PPP solution then not applicable will be displayed) and the minimum SNR values are
displayed.

2.9.3 Config

The Config menu provides controls to select which PPP Solution is used, the Elevation
Mask setting for the available DGNSS services, the DOP masks for PPP and DGNSS
services and if the optional MF/UHF are available you can choose to enable or disable the
use of the RTCM from each module.
Solutions/ Config/ Elevation Mask
You can edit the elevation mask of all DGNSS services such as Standard and Standard².
For PPP services such as Ultra or Apex – the Elevation mask cannot be configured
(default 7°).
LD6 (Version 8 & Version 50) Operations Manual
42(85)