Veripos LD6 Operation Manual page 36

2.8.1.1 Channel Monitor
UHF/Status/Channel shows the Channel number, Frequency and rate.
It is useful to monitor the UHF signal strength.
Typical ranges in use are;
SS =
SNR =
2.8.1.2 Tuning Summary
UHF/ Status/ then use arrow keys
Displays the Channel number used, Frequency entered, baud rate, protocol,
Modulation, FEC and Sensitivity.
LD6 (Version 8 & Version 50) Operations Manual
Signal Strength
Signal to Noise Ratio
LD6 Operation
35(85)