Mf Config - Veripos LD6 Operation Manual

2.7.1.2 Module info
Touch the arrow to display the SBX-4 module information.
This gives information on whether the MF receiver is in AUTOMATIC,
AUTODISTANCE or MANUAL mode as well as the serial and firmware numbers
for the SBX-4 MF receiver card.
2.7.2

MF Config

Use Home/ MF/ Config to edit the operating mode of the SBX-4 card between
Automatic, Autodistance and Manual.
VERIPOS recommend the use of AUTOMATIC mode.
Operating mode options:
AUTOMATIC
AUTODISTANCE
MANUAL
To change operating mode, touch the Edit button to amend the card channel
setting.
LD6 (Version 8 & Version 50) Operations Manual
Searches for strongest signal
Configures for closest MF reference station
Selects only from stations in the LD6 database
NOTE: not available when in QC Mode.
User entered frequency and bit rate
LD6 Operation
32(85)