Veripos LD6 Operation Manual page 58

2.11.3.5 LD6 Serial cable Pin – out
2.11.3.6 LD6 RS 232 / RS422
Default configuration for each COM port is:
• 1 start bit
• 8 data bits
• No parity
• 1 stop bit
This information may be required when interfacing to ships systems using
RS-232/422 standards. The LD6 is the transmitting device.
LD6 (Version 8 & Version 50) Operations Manual
DB9 RS-232
1 Not connected
2 TxD
3 RxD
4 Not connected
5 Signal ground
6 Not connected
7 Not connected
8 Not connected
9 Not connected
RS422
Not connected
Tx(-)
Rx(+)
Not connected
Signal Ground
Not connected
Tx(+)
Rx(-)
Not connected
LD6 Operation
57(85)