Veripos LD6 Operation Manual page 56

2.11.3.3 NMEA output
When configuring the NMEA position outputs, the COM ports and protocol are selected for
each of three solutions (1, 2 and Out3) from the Settings / I/O screen.
Home / Solutions / NMEA.
Assign a service (Best, Std² or Std) to each solution.
Next select the required NMEA messages to each:-
2.11.3.4 Multiple Data Stream Outputs
Users can output the identical messages to different ports.
First select an unassigned LD6 COM port e.g. COM14.
Settings/ I/O and the use the Arrows to highlight the port:
LD6 (Version 8 & Version 50) Operations Manual
LD6 Operation
55(85)