Veripos LD6 Operation Manual page 21

LD6 Operation
Next touch the Beams button to view or amend the Beam selected. If the correct
regional Beam is shown no edit is required.
If "No Beam" or the incorrect regional beam is shown, select Edit and select the
beam for your work region.
Use the up/down on-screen arrows to highlight and select the beam required.
When the required beam name is highlighted, touch the Enable button, and then
Close.
Return to the LD6 Home page
The 'S' (Sync) icon will turn from red to green when a usable beam is correctly
selected and signals are received.
To view overall L-Band signal status and confirm a beam is being received -
select Home/ LBAND/ Status.
LD6 (Version 8 & Version 50) Operations Manual
20(85)