View L-Band Station Status - Veripos LD6 Operation Manual

LD6 Operation
NOTE
Reference stations on RTCMa are used internally and are also available for output to
other devices. Veripos recommend in most cases that all stations are enabled. The LD6
will use up to a maximum of eight reference stations for VERIPOS Standard solutions,
depending on user's location and LD6 variant.
2.5.6

View L-Band Station Status

To View stations:
Go to LBAND/ Config and select the RTCM data stream required and touch the view
button.
Slide your finger up and down on the touch screen to view more stations available on
the Beam or to view the list of Disabled stations.
To view the L-Band signal status:
From the Home screen select LBAND/ Status.
Review the status of SNR, Beam, Frame Sync, Signal Lock, Signal Strength and LD6
enable status.
LD6 (Version 8 & Version 50) Operations Manual
24(85)