Uhf Receiver; Status Channel Monitor And Tuning Summary - Veripos LD6 Operation Manual

2.8 UHF Receiver

The UHF receiver card is an optional receiver.
The card comes preconfigured for use with Petrobras systems.
Channels 1 to 9 have channels as specified by Petrobras.
Channels 10 to 12 are available for user configuration.
Touch the onscreen UHF button to display Status and Config options.
The Module Reboot will perform a reboot to the module and save a full LD6
reboot.
The Factory Reset button should only be used under direction from VERIPOS.
Hints can display relevant advice.
2.8.1

Status Channel Monitor and Tuning summary

Go to Home/ UHF/ Status/ Module Info
Displays the UHF card serial number and firmware version.
LD6 (Version 8 & Version 50) Operations Manual
LD6 Operation
34(85)