Nmea - Veripos LD6 Operation Manual

LD6 Operation
2.9.4

NMEA

Use the arrows on the left to select from Solutions 1, 2 or 3.
Touch the Next arrow.
Use the up/ down arrows on the left to select if this solution is to output Best, Std² or Std
(Standard), as required / available.
Touch Next, then select the Message(s) strings to be output.
A notification message will appear when multiple position strings (which may cause
operational problems) are selected for output.
When all messages required for that solution are selected, touch the Finish arrow.
The LD6 will confirm that you wish to reset the output port.
NOTE
During change there may be no output of position data.
You will be unable to select both GGA and GGX strings, as GGX is a NMEA GGA output
with precision to 7 decimal places in lat and long fields.
LD6 (Version 8 & Version 50) Operations Manual
45(85)