Veripos LD6 Operation Manual page 12

LD6 Operation
When configured the LD6 automatically selects the best available solution for output,
with automatic fall – back to the next best solution.
Multiple messages are supported with configurable outputs of position data from the
ports in NMEA format (V3).
For timing a ZDA message can be output for use with 1PPS output.
The LD6 supports RS 232 and 422 output from galvanic isolated ports and output to
LAN.
Some of the features discussed in this manual are only available in the latest system
software version. If any of the features described are not available on your LD6, please
contact VERIPOS to check if you have the latest LD6 software installed.
LD6 (Version 8 & Version 50) Operations Manual
11(85)