Status - Veripos LD6 Operation Manual

2.7.1

Status

Touch the Status button.
This shows the device status screens for the MF card (MF-SBX4) and gives
access to MF card Module info and available channels for correction data.
The RTCM entry shows the correction age in seconds. In normal use this will
correct every few seconds.
If the MF RTCM signal is lost the time will increment up to 300 seconds then
show >300 s.
2.7.1.1 Channel
Touching the Channel arrow shows the Channel Monitor screen with information
on the channel selected – Station, Frequency, Bit rate, Signal strength (SS),
Signal to noise ratio (SNR) and Word error rate (WER).
A typical MF channel values range is shown in the screen above.
Stat:
Freq:
Rate:
SS:
SNR:
WER:
LD6 (Version 8 & Version 50) Operations Manual
Unique numerical ID number and name of station
Frequency of the received station
Data baud rate of the received transmission
The signal strength received in dB µV/m
The current signal to noise ratio in dB/Hz
The word error rate
LD6 Operation
31(85)