Veripos LD6 Operation Manual page 45

LD6 Operation
Use the Arrows to highlight the card to Enable or Disable and use the onscreen buttons
to action. Where enabled, the corrections received by these modules will be included in
the DGNSS solution.
Solutions/ Config/ PPP Service
The menu item only appears where the Access code supports multiple PPP services.
This section allows users to switch between High accuracy PPP services.
NOTE
The LD6 will only compute and output ONE PPP solution. Users can switch between High
Accuracy PPP solutions but must allow for service convergence time before high accuracy
position output.
Use the Button to switch to the required High Accuracy service to be used by the internal
algorithm of the LD6, e.g. Apex.
The LD6 will request confirmation for this change. A warning box appears to alert user
that switching between PPP solutions will lead to a period of time (settling) where there is
a loss of PPP solution data being output.
LD6 (Version 8 & Version 50) Operations Manual
44(85)