LD6 Operation
NOTE
If using SBAS backup the user should set the NMEA Config to the same messages that
are set on Solutions 1, 2 or 3 (depending on the solution that is being output).
Use the Edit button, arrow keys and Update button to amend the selected output
messages.
Touch Close when finished.
2.6.3.2
PPS Settings
Use the Edit button, arrow keys and Enter button to amend settings of pulse
polarity characteristics between Low-to-High and High-to-Low.
Touch Close when finished.
LD6 (Version 8 & Version 50) Operations Manual
28(85)