View And Edit Reference Stations - Veripos LD6 Operation Manual

LD6 Operation
View the Access code provided from the Helpdesk following the steps below;
The Access State will show:
Enabled for the requested VERIPOS services
Or
Disabled for VERIPOS service.
This confirms service(s) are enabled and being received by the LD6 from the selected
beam.
2.5.5

View and Edit Reference Stations

Once the LD6 is enabled, the VERIPOS reference station RTCM information is available.
The LD6 L-Band card outputs two data streams of RTCM corrections:-
RTCMa and RTCMb.
These may be configured independently and both may be selected for output on the LD6
.
COM or LAN ports
RTCMa is additionally used internally, providing correction information to the LD6
internal position computation.
LD6 (Version 8 & Version 50) Operations Manual
22(85)