Gnss Config - Veripos LD6 Operation Manual

Move between SV's using the Up/Down arrows and return to the previous screen
with the Back button.
Where GLONASS satellites are tracked an "R" will be shown in the SV number
field.
2.6.3

GNSS Config

This screen (Home/ GNSS/ Config) allows the user access to the GNSS Configuration
Menus for PPS polarity profile settings and information on Event Markers.
2.6.3.1 NMEA Config
If using Veripos Services, the output message settings for Veripos Solutions are set in
Solutions/ Config/ NMEA.
The GNSS/ Config/ NMEA Config page within is used when:
•
The user requires an accurate timing signal (i.e. ZDA)
•
The user is using an SBAS backup to the VERIPOS Solution.
LD6 (Version 8 & Version 50) Operations Manual
NOTE
LD6 Operation
27(85)