Ld6 Configuration Backup - Veripos LD6 Operation Manual

2.13

LD6 Configuration Backup

The LD6 configuration settings can be backed up onto an external USB drive if required.
This allows for configurations to be saved and restored after a factory reset. This also
allows for the transfer of configuration settings from one LD6 to another.
The configuration backup procedure backs up the following:
•
All user-configurable settings entered via the LD6 front panel display e.g. LBAND
beam selection, network settings, COM port settings etc.
•
Orion software settings – If applicable
•
Verify QC configuration files – If applicable (Must be loaded on after an LD6
configuration restore).
During the backup process, an LD6ImportExport directory will be created on the USB
drive. Where applicable, within this directory subdirectories containing Verify QC and/or
Orion configuration back-ups will be created. The back-up process will create a
subdirectory containing all other settings, named using the following date/time naming
convention:
YYYY-MM-DDTHH-MM-SS (example 2019-01-09T20-54-33)
To back up the current LD6 configuration, insert a USB memory stick. The following
page will then be displayed:
Touch Export Config Files. After this, the window below will appear confirming that the
LD6 configuration has been successfully exported:
Press OK, followed by Eject all before removing the USB memory stick:
LD6 (Version 8 & Version 50) Operations Manual
LD6 Operation
63(85)