Disclaimer - Veripos LD6 Operation Manual

Introduction

1.9 Disclaimer

VERIPOS Limited (hereinafter referred to as "VERIPOS") has taken every care in the preparation of
the content of this Manual ("Manual"). This Manual and its contents are provided "as is" without any
representations or warranties, express or implied. VERIPOS makes no representations or
warranties in relation to this Manual and the content provided herein, including but not limited to the
safety, suitability, inaccuracies or typographical errors of this Manual. There are inherent dangers in
the use of any software (including any firmware), and the end user is solely responsible for
determining whether the relevant software provided by VERIPOS and this Manual are compatible
with the end user's equipment and other software installed on such equipment. End user is also
solely responsible for the protection of equipment and the backup of data.
VERIPOS reserves the right at its sole discretion, but without any obligation, to make amendments
or improvements to, or withdraw or correct any error(s) or omission(s) in any portion of the Manual
without notice. Although VERIPOS makes a reasonable effort to include accurate and up to date
information, VERIPOS does not warrant or represent that this Manual and its contents are current,
complete, accurate and/or free from errors. VERIPOS does not accept any responsibility or liability
for the accuracy, content, completeness, legality or reliability of this Manual and the content
provided herein.
If you have any questions or comments about this Manual or our Privacy Policy, please contact us
at: support@veripos.com.
The LD6 hardware and associated software is subject to VERIPOS Terms and Conditions Relating
to the Provision of VERIPOS Services.
The software described in this document is furnished under a licence agreement and/or non-
disclosure agreement. The software may be used or copied only in accordance with the terms of
such agreement. It is against the law to copy the software on any medium except as specifically
provided for in the license or non-disclosure agreement.
Copyright © 2022 VERIPOS Limited. All rights reserved.
No part of this Manual and its contents may be reproduced, copied, re-engineered, adapted,
redistributed, published, commercially exploited or transmitted in any form, by any means, electronic
or mechanical, including photocopying or recording, without the express prior written permission of
VERIPOS. Applications for any written permission should be addressed to VERIPOS House, 1B
Farburn Terrace, Dyce, Aberdeen, AB21 7DT, United Kingdom.
Unauthorised reproduction, copying, re-engineering, adaptation, redistribution, publication or
commercial exploitation of this Manual or its contents may be subject to civil as well as criminal
sanctions under the applicable laws. VERIPOS will aggressively protect and enforce its intellectual
property rights to the fullest extent, which may include seeking all available remedies in the civil or
criminal courts if necessary. Where reproduction, copying, re-engineering, adaptation, redistribution,
publication or commercial exploitation of this Manual or its contents has been permitted by
VERIPOS in accordance with this disclaimer, then no changes in the Manual or deletion of any kind
to the Manual may be made. You acknowledge that you do not acquire any ownership rights by
accessing, viewing or utilising this Manual and agree that you shall not hold itself out to any third
party as having any ownership rights to this Manual.
You further agree to save, indemnify, defend and hold VERIPOS harmless on written demand, from
all claims, losses, damages, costs (including legal costs), expenses and liabilities of any kind and
nature, invoked against VERIPOS by any third party, for or arising out of, any alleged infringement
of any proprietary or protected right arising out of or in connection with your utilisation of this Manual
and/or in connection with any representation made by you to third parties of ownership of any kind
with respect to this Manual.
®
VERIPOS is a trademark of VERIPOS Limited and/or its licensors. All other marks used herein are
trademarks of their respective holders. All other marks used herein are trademarks of their
respective holders. Veripos Limited is part of the Hexagon Autonomy and Positioning division of
companies of Hexagon AB.
LD6 (Version 8 & Version 50) Operations Manual
9(85)