Solutions; Status - Veripos LD6 Operation Manual

2.9.1

Solutions

Go to Home/ Solutions
Solutions provide access to the Status, Configuration and three output configurations for
NMEA signal streams.
Solution output from the LD6 is unavailable when in QC Mode.
•
Status – shows General information, Position, DOP, Mask and Maximum values for
the currently selected position solution, e.g. Ultra.
•
Config – shows details related to each solution and allows limited editing of mask
values and to enable the input of third party, e.g. MF Beacon corrections.
•
NMEA – these message streams can be selected as part of the output
from the LD6 to ships system and allows the setup of up to three message streams
(Out 1, 2 and 3) using the following message types:
GGA, GGX, VTG, GLL, GSA, GRS, GSV, GST, RMC, ZDA
Up to three message streams can be classified as 'Best', 'Std²' or 'Std' (standard) to suit.
2.9.2

Status

The General Info, Position Info, DOP Mask Values and Max Values screens Provide
information relating to the Solution settings currently being output from the LD6.
General Info
Screen shows the VERIPOS service being used, the Position Mode and number of
Satellites being used to derive the position output.
LD6 (Version 8 & Version 50) Operations Manual
NOTE
LD6 Operation
41(85)