Calibrate Screens 1/2 - Veripos LD6 Operation Manual

2.10.6.3 File Manager
The File Manager button and function is only made available when the LD6 is in QC
Mode.
Use of File Manager is described in the Verify QC for LD6 manual.
2.10.6.4 Dual Monitor Screen Layout
When an external monitor is attached, the external monitor effectively becomes an
extension of The LD6 screen. The LD6 screen is always defined as screen 1 and the
external screen is screen 2.
A mouse can be used to control both screen 1 and screen 2. To move the mouse from
the LD6 screen on to the external monitor, drag the mouse to the right.
To mouse the mouse from the external monitor to the LD6 screen, drag the mouse to the
top left of the monitor.
The screen layout used is shown below:
2.10.7

Calibrate Screens 1/2

Touch these buttons when displayed and follow the instructions to calibrate the
touchscreen.
The Calibrate Screen 2 will only appear when an external monitor has been connected.
Screen 2 can only be calibrated when an external touchscreen monitor is used.
LD6 (Version 8 & Version 50) Operations Manual
LD6 Dual screen layout
LD6 Operation
49(85)