Ip Ports - Veripos LD6 Operation Manual

2.11.4.4 Verify QC and IP / Ethernet
Ethernet is the preferred method of interfacing to Verify QC.
All interfaces can be supported using a single CAT5e network cable.
Cable runs typically encountered on vessels fall within the Ethernet specification.
This contrasts to when using RS232, multiple cables are required and longer runs may
pose problems when high baud rates are required [e.g. for GNSS Raw].
All I/O signals which are available on the COM ports can also be interfaced via the LAN.

2.11.5 IP Ports

The LD6 IP port assignments are listed below.
LD6 (Version 8 & Version 50) Operations Manual
Data Stream
LBAND: LBR1 – RTCMa
LBAND: LBR1 - RTCMb
GNSS: AsteRX2 - Raw
GNSS: AsteRx2 - Config
MF: SBX4 - RTCM
GNSS: AsteRx2 - NMEA (ZDA)
UHF: PacificCrest RTCM
Solutions: Out1
Solutions: Out2
Solutions: Out3
Solutions: In RTCM1
Solutions: In RTCM2
Solutions: In RTCM3
LD6 Operation
IP Socket
9001
9002
9012
9013
9031
9011
9051
19016
19017
19018
19013
19014
19015
61(85)