Veripos LD6 Operation Manual page 39

Use the Arrows, Previous and Next buttons to enter the Frequency required.
When entered touch the Update button then the Close button.
The Manually entered channel can then be selected for use;
Home/ UHF/ Config/ Yes.
Select the channel number / frequency combination required and touch Select.
2.8.2.2 Link Speed, FEC and Sensitivity
Amend the link speed from Home/ UHF/ Config/ Yes/ Tune/ Link Speed.
Use the onscreen controls to select
•
Select Link Speed of 4800 or 9600 bps.
•
Forward Error Correction on or off
•
Switch Sensitivity between Low, Medium and High.
When finished entering information return to the Status section (Home/ UHF/ Status)
to review the RTCM data delay and channel settings applied.
LD6 (Version 8 & Version 50) Operations Manual
LD6 Operation
38(85)