Veripos LD6 Operation Manual page 24

LD6 Operation
Recommendation
On the RTCMa data stream all reference stations should be set to enabled. The LD6
internal calculations will determine automatically the best stations for use.
Use RTCMb to provide output of corrections to third party equipment. Depending on the
application it may be desirable for the user to select the appropriate stations for this
equipment.
The following section describes this process.
Refer to a list of all VERIPOS stations showing their station number, name and region
which can be downloaded from https://help.veripos.com
To enable or disable station(s):
From the Home screen select LBAND/ Config and select RTCMa or RTCMb then
touch Edit.
Use the up/down arrows to highlight the station number and the disable button to remove
it from use.
When finished editing touch the Close button.
The above process can be carried out for both RTCMa and RTCMb data streams.
LD6 (Version 8 & Version 50) Operations Manual
23(85)