Veripos LD6 Operation Manual page 44

LD6 Operation
Solutions/ Config/ DOP Masks
This section allows editing of the mask settings by service.
Use the arrow keys to select the service then select Edit to highlight and select the
required elevation and HDOP, PDOP and VDOP mask settings in degrees.
Touch the Edit button and use the Up/Down and Right arrows to select the value(s) for
each parameter. Touch the Enter button when finished.
Solutions / Config/ Correction Input/ Edit
This menu option is used in LD6 units when fitted with MF and/or UHF receivers.
Use this menu to Enable or Disable the Receiver card(s).
LD6 (Version 8 & Version 50) Operations Manual
43(85)