Figure 36 Manually Add Devices; Table 13 Remote Channel Parameters - Honeywell 35 Series User Manual

Figure 36 Manually Add Devices

Table 13 Remote Channel Parameters

Parameter
Channel
IP address
Protocol
RTSP Port
HTTP Port
User name
Password
Remote CH No.
Honeywell 35 Series Network Video Recorder User Guide
b. Configure parameters.
Description
-
In the IP address box, enter the IP address of the remote device.
The user can click the added channel to copy the channel
information and then modify information, such as the remote
channel.
ONVIF /RTSP1-16
The default value setting is 554. You can select the value
according to your actual situation.
The default value setting is 80. You can enter the value according
to your actual situation.
If you enter other value, for example 70, you should enter 70 after
the IP address when logging in the device by browser.
Enter the user name of the remote device.
Enter the password of the user for the remote device.
Enter the remote channel number of the remote device that you
want to add.
31