Configuring Video Tampering Settings - Honeywell Performance Series User Manual

Performance Series Network Video Recorder User Guide
Figure 8-6 Video Loss Configuration Tab
2. On the Video Loss tab, in the Channel box, select the channel (camera) for which you
want to configure video loss detection settings.
3. Select the Enable check box to enable video loss detection for the selected channel.
4. To set the periods when video loss detection is active, next to Period, click Set, and then
follow the steps listed in
5. To set the actions that you want the system to initiate when a video loss event occurs,
follow the steps listed in
6. Click Apply to save your settings.
7. To copy the settings to additional channels, click Copy, select the channels to which you
want to copy the settings, and then click OK.

Configuring Video Tampering Settings

1. Go to Main Menu  SETTING  EVENT  VIDEO DETECTION  Tampering.
Figure 8-7 Video Tampering Configuration Tab
84
To set up motion detection periods
To set up motion detection event actions
on page 81.
on page 82.