Attributes Supported - YASKAWA SI-N3 Technical Manual

■

Attributes Supported

Instance ID Attribute
0 1
1
2
3
4
5
6
1
7
Explicit
8
9
12
13
14
15
16
1
2
3
2
Polled I/O
4
5
6
7
8
9
12
YASKAWA SIEP C730600 84F DeviceNet Technical Manual
Name
DeviceNet Connection object software
Object Software Revision
revision
Status of the instance.
00: Network not found or not yet
connected.
01: Online, awaiting connection from
the master.
State
02: Waiting to write the connection
ID.
03: Connected successfully.
04: Timeout.
Shows the instance type.
Instance type 00: Explicit message
01: I/O message
Transport class trigger Defines behavior of the connection.
The label used in the comm. header
Produced connection ID
for the drive.
Set once the comm. connection is
Consumed connection ID
complete.
Initial comm characteristics Code for the comm. type.
Maximum number of bytes that can be
Produced connection size
transmitted.
Consumed connection size Maximum number of bytes received.
The time to timeout after receiving a
Expected packet rate comm. request. Rounds up to the
nearest 10 ms.
Action taken after timeout.
00: Save value until reset or power is
shut off
Watchdog time-out action
01: Auto delete
02: Restart while remaining connected
Produced connection path Number of bytes for the transmission
length connection path.
Specifies the application object that
Produced connection path will produce data by this Connection
Object.
Consumed connection path Number of bytes in the consumed
length connection path.
Specifies the Application Object that
Consumed connection path will receive data consumed by this
Connection Object.
Status of the instance.
00: Network not found or not yet
connected.
01: Online, awaiting connection from
the master.
State
02: Waiting to write the connection
ID.
03: Connected successfully.
04: Timeout.
Shows the instance type.
Instance type 00: Explicit message
01: I/O message
Transport class trigger Defines behavior of the connection.
The label used in the comm. header
Produced connection ID
for the drive.
Set once the comm. connection is
Consumed connection ID
complete.
Initial comm characteristics Code for the comm. type.
Maximum number of bytes that can be
Produced connection size
transmitted.
Consumed connection size Maximum number of bytes received.
The time to timeout after receiving a
Expected packet rate comm. request. Rounds up to the
nearest 10 ms.
Watchdog time-out action Action taken after timeout.
Description Get
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
10 General Class Objects
Set Size Range
- Word -
- Byte -
- Byte -
- Byte -
- Word -
- Word -
- Byte -
- Byte -
- Byte -
○ Word 0 - 65535
- Byte -
- Word -
- Array -
- Word -
- Array -
- Byte -
- Byte -
- Byte -
- Word -
- Word -
- Byte -
- Byte -
- Byte -
*1
○ Word 0 - 65535
○ Byte 0 - 2
Default
1
3
0
83 (Hex.)
-
-
21 (Hex.)
-
-
2500
1
0
-
0
-
3
1
-
-
-
4
4
0
0
85