Oracle Database Appliance Service Manual page 80

Remove Primary HBA PCIe Card From Motherboard
->
Are you sure you want to clear /SYS/MB/RISER/PCIE2 (y/n)?
Set 'clear_fault_action' to 'true'
Remove Primary HBA PCIe Card From Motherboard
1. Prepare the server node for service.
Attach an antistatic wrist strap.
a.
See
b. Remove the server node from the system.
Power is removed from the server node when you remove it from the system. See
"Removing Server Nodes From the System Chassis" on page
c. Remove the server node top cover.
See
2. Remove the primary PCIe card.
Locate the internal PCIe card [1].
a.
The internal PCIe card is located next to the rear-mounted disk drives.
Disconnect the data cables from the PCIe card [1].
b.
80 Oracle Database Appliance Service Manual • February 2016
set /SYS/MB/RISER/PCIE2 clear_fault_action=true
"Performing Electrostatic Discharge and Antistatic Prevention Measures" on page
"Removing the Server Node Top Cover" on page
y
34.
35.
34.