Oracle Database Appliance Service Manual page 29

A part designated as a CRU can be replaced by a person who is not an Oracle-qualified
■
service technician.
The following table lists replaceable components, their service designation (CRU or FRU), and
the system power policy related to servicing the component.
Component
Storage drives and boot drives
(CRU)
Fan modules (CRU)
Power supplies (CRU)
Air duct (FRU)
DIMMs (CRU)
PCIe risers (CRU)
PCIe cards (CRU)
Boot disk backplane (FRU)
Server node battery (CRU)
Processors (CPUs) (FRU)
Motherboard (FRU)
Server node internal cables (FRU)
Power distribution board (FRU)
Disk midplane module (FRU)
Disk midplane module HDD cable
(FRU)
Preparing Oracle Database Appliance (Original Version) for Service
Policy
Hot-swappable – Can be removed and replaced when the system is powered
on.
Hot-swappable – Can be removed and replaced when the system is powered
on.
Hot-swappable – Can be removed and replaced when the system is powered
on.
Cold service, server node – Can only be removed and replaced when the
server node is powered off. The other server node and the system chassis can
remain on.
Cold service, server node – Can only be removed and replaced when the
server node is powered off. The other server node and the system chassis can
remain on.
Cold service, server node – Can only be removed and replaced when the
server node is powered off. The other server node and the system chassis can
remain on.
Cold service, server node – Can only be removed and replaced when the
server node is powered off. The other server node and the system chassis can
remain on.
Cold service, server node – Can only be removed and replaced when the
server node is powered off. The other server node and the system chassis can
remain on.
Cold service, server node – Can only be removed and replaced when the
server node is powered off. The other server node and the system chassis can
remain on.
Cold service, server node – Can only be removed and replaced when the
server node is powered off. The other server node and the system chassis can
remain on.
Cold service, server node – Can only be removed and replaced when the
server node is powered off. The other server node and the system chassis can
remain on.
Cold service, server node – Can only be removed and replaced when the
server node is powered off. The other server node and the system chassis can
remain on.
Cold service, system chassis – Servicing this component requires that the
power be completely removed from the system chassis (both server nodes
powered off).
Cold service, system chassis – Servicing this component requires that the
power be completely removed from the system chassis (both server nodes
powered off).
Cold service, server node – Can only be removed and replaced when the
server node is powered off. The other server node and the system chassis can
remain on.
Chapter 2 • Preparing Oracle Database Appliance for Service 29