Oracle Database Appliance Service Manual page 126

Remove PCIe Card Cables From Secondary HBA PCIe Card
c. Power on the server node.
See
Remove PCIe Card Cables From Secondary HBA PCIe Card
1. Prepare the server node for service.
a. Attach an antistatic wrist strap.
See
b. Remove the server node from the system.
Power is removed from the server node when you remove it from the system. See
"Removing Server Nodes From the System Chassis" on page
c. Remove the server node top cover.
See
2. Disconnect the PCIe card cables and remove them from the server node.
The Secondary HBA PCIe Card sits in the top slot on the PCIe riser (PCIe slot 2)
Loosen the three green, captive Phillips screws that secure the server
a.
node's front cover and remove the cover [1].
Disconnect the two secondary HBA PCIe card cables and remove the cables
b.
[2].
126 Oracle Database Appliance Service Manual • February 2016
"Powering On Oracle Database Appliance (Original Version)" on page
"Performing Electrostatic Discharge and Antistatic Prevention Measures" on page
"Removing the Server Node Top Cover" on page
142.
34.
35.
34.