Oracle Database Appliance Service Manual page 123

Power is removed from the server node when you remove it from the system. See
"Removing Server Nodes From the System Chassis" on page
c. Remove the server node top cover.
See "Removing the Server Node Top Cover" on page
2. Disconnect the fan power cables and remove them from the server node.
Install Fan Power Cables
Reconnect the fan power cables.
1.
Return the server node to operation.
2.
a. Install the server node top cover.
See "Installing the Server Node Top Cover" on page
Install the server node into the system.
b.
See "Installing a Server Node Into the System Chassis" on page
c. Power on the server node.
See "Powering On Oracle Database Appliance (Original Version)" on page
Install Fan Power Cables
34.
35.
139.
140.
142.
Chapter 5 • Servicing FRUs 123