Oracle Database Appliance Service Manual page 110

Remove Disk Midplane Module
a. Power off the system.
See
Disconnect the power cords from the system.
b.
If the system is installed in a rack, remove it.
c.
See the Oracle Database Appliance Owner's Guide for information on racking the system
chassis.
d. Remove both power supplies from the system.
See
e. Attach an antistatic wrist strap.
See
2. Remove all of the front storage drives.
See "Remove a Storage Drive" on page
Remove both server nodes from the system.
3.
See "Removing Server Nodes From the System Chassis" on page
4. Remove the middle section of the system top cover.
See "Removing the Middle Section of the System Top Cover" on page
Loosen the two captive Phillips screws that secure the side-wall cover to the
5.
chassis and remove the cover.
110 Oracle Database Appliance Service Manual • February 2016
"Shutting Down a Server Node and Powering Off the System" on page
"Remove a Power Supply" on page
"Performing Electrostatic Discharge and Antistatic Prevention Measures" on page
58.
50.
31.
34.
36.
34.