Oracle Database Appliance Service Manual page 129

b. Disconnect both cable connectors from the motherboard and remove the
cable [2].
Push the connector inward, press down on the connector to release it, and pull the
connector out.
Install SAS Expander Cable
Reconnect the SAS expander cable.
1.
a. Reconnect the SAS expander cable connectors to the motherboard [2].
b. Position the server node's front cover onto the server node and tighten
the three green, captive Phillips screws that secure the server node's front
cover to the motherboard [1].
2. Return the server node to operation.
Install the PCIe riser.
a.
See "Install PCIe Riser in Server Nodes" on page
b. Install the server node top cover.
See "Installing the Server Node Top Cover" on page
Install SAS Expander Cable
74.
139.
Chapter 5 • Servicing FRUs 129