Oracle Database Appliance Service Manual page 104

Install Boot Disk Backplane
a. Disconnect the power and data cables [1].
b. Remove the four Phillips screws that secure the boot disk backplane to the
rear-mounted disk drives assembly and remove the backplane [2].
Place the boot disk backplane on an antistatic mat.
4.
Install Boot Disk Backplane
Install the boot disk backplane.
1.
Position the boot disk backplane on the rear-mounted disk drives assembly
a.
and install and tighten the four Phillips screws to secure the backplane [2].
Reconnect the power cable and the data cables [1].
b.
2. Return the server node to operation.
Re-seat the boot disk drives.
a.
See
b. Install the server node top cover.
See
104 Oracle Database Appliance Service Manual • February 2016
"Install a Boot Drive" on page
"Install Server Node Top Cover" on page
53.
139.