Removing The Middle Section Of The System Top Cover - Oracle Database Appliance Service Manual

Remove the Middle Section of System Top Cover
2. Remove the top cover.
a. To unlatch the server node top cover, press and hold the green release
button on the top of the server node cover [1].
Using the indented area near the green release button, slide the cover
b.
toward the front of the server node about 0.5 inches (12.7 mm) [1].
c. Lift the cover up and remove it [2].
Removing the Middle Section of the System Top
Cover
To gain access to the Oracle Database Appliance (original version) power distribution board
and the disk midplane board you must remove the middle section of the system's top cover.
Remove the Middle Section of System Top Cover
Power down the server nodes and remove the power cords from the power
1.
supplies.
For instructions, see
Caution -
power cords are connected. Otherwise the fault LEDs light and a system fault is logged.
2. Remove the middle section of the system top cover.
36 Oracle Database Appliance Service Manual • February 2016
"Shut Down a Server Node" on page
System fault. Do not remove the middle section of the system cover while the AC
31.