Oracle Database Appliance Service Manual page 90

Update System_Identifier Information
number on the top of the server (left front). See
Information for a Replacement Motherboard or Disk Backplane" on page 88
location.
3. Confirm that the information has been successfully updated by viewing the
system_identifier field. Enter the following command:
show /System
The system information is displayed. For example:
/System
Targets:
Properties:
4. Confirm that the FRU TLI information is also correct for the system, as follows:
model: should list the appliance model.
■
part_number: should list the appliance TLI part number.
■
serial_number: should list the appliance TLI serial number.
■
component_model: should list the server node model.
■
component_part_number: should list the server node part number.
■
component_serial_number: should list the server node serial number.
■
90 Oracle Database Appliance Service Manual • February 2016
Open_Problems (0)
Processors
Memory
Power
Cooling
Storage
Networking
PCI_Devices
Firmware
BIOS
health = OK
health_details = -
open_problems_count = 0
type = Rack Mount
model = ODA X3-2
part_number = 12341003+2+1
serial_number = 5678FM0001
component_model = SUN FIRE X4170 M3
component_part_number = 7064195
component_serial_number = 1150FML00J
system_identifier = Oracle Database Appliance X3-2 5678FM0001
system_fw_version = 3.1.2.10.a
"Updating System_Identifier and/or FRU ID
for label