Configuring Sp Lan Settings - Oracle Database Appliance Service Manual

Configure LAN Settings for SP
Confirm that the TCG/TPM Support setting is set to Yes and the TPM Enabled/Disable
Status is set to Enabled.
Press F10 to exit the BIOS Setup Utility.
10.
This completes the TPM configuration.

Configuring SP LAN Settings

You can assign an IP address for the Oracle Database Appliance (original version) server node
SP from the BIOS Setup Utility on the IPMI LAN configuration menu. Alternatively, you can
also specify the LAN settings for the SP using Oracle ILOM. For instructions for setting the
IP address in Oracle ILOM, see Oracle Integrated Lights Out Manager (Oracle ILOM) 3.0
Documentation Collection.
Configure LAN Settings for SP
1. Access the BIOS Setup Utility menus.
164 Oracle Database Appliance Service Manual • February 2016