Oracle Database Appliance Service Manual page 58

Remove a Power Supply
For information about power supply status LEDs, see
Indicators" on page
This section includes:
"Detecting a Power Supply Failure" on page 58
■
"Remove a Power Supply" on page 58
■
"Install a Power Supply" on page 59
■
Detecting a Power Supply Failure
The following LEDs light up when the system detects a power supply fault:
Front and rear Service Required LEDs located on each server node
■
REAR HDD/PS/FAN LED located on the front of each server node
■
Service Required LED located on the faulty power supply
■
See "Server Node Status Indicators" on page 17
Remove a Power Supply
Caution -
health, follow the instructions.
1. Identify which power supply (0 or 1) requires replacement.
A lit Service Required LED on a power supply indicates that a failure was detected. For
information about power supply status LEDs, see
Disconnect the power cord from the faulty power supply.
2.
3. Grasp the power supply handle and press the release latch [1]).
58 Oracle Database Appliance Service Manual • February 2016
21.
Hazardous voltages. To reduce the risk of electric shock and danger to personal
"Power Supply Status
on page 1-6 for information about these LEDs.
"Power Supply Status Indicators" on page 21.