Access BIOS Setup Utility Menus
Connect to the server node using the Oracle ILOM Remote Console.
■
The following procedure describes the steps for accessing the BIOS Setup Utility menus.
Access BIOS Setup Utility Menus
1.
Power-on or power-cycle the server node.
2.
The following information appears on the screen:
To enter the BIOS Setup Utility, do the following:
3.
a.
Wait for the last line of the screen output to change to Initializing USB
Controllers..Done
This will take several seconds.
b.
When Done appears, press the F2 key immediately.
Note -
Utility.
168
Oracle Database Appliance Service Manual • February 2016
If there is an error during the boot process, you can press F1 to access the BIOS Setup