Oracle Database Appliance Service Manual page 131

b. Disconnect the power cable and HDD cables from the boot disk backplane
[2].
Install Boot Disk Backplane Cables
1. Reconnect the power cable and hard disk drive (HDD) cables.
Reconnect the power cable and HDD cables to the boot disk backplane [2].
a.
b. Reconnect the power cable and HDD cables to the motherboard [1].
2. Return the server node to operation.
a. Install the server node top cover.
See "Installing the Server Node Top Cover" on page
b. Install the server node into the system.
See "Installing a Server Node Into the System Chassis" on page
Power on the server node.
c.
See "Powering On Oracle Database Appliance (Original Version)" on page
Install Boot Disk Backplane Cables
139.
140.
142.
Chapter 5 • Servicing FRUs 131