Maintaining Components; Required Tools And Parts For Maintaining The Srx550 High Memory Services Gateway Hardware Components; Routine Maintenance Procedures For The Srx550 High Memory Services; Gateway - Juniper SRX550 Hardware Manual

CHAPTER 19

Maintaining Components

Required Tools and Parts for Maintaining the SRX550 High Memory Services Gateway
Hardware Components
Related
Documentation
Routine Maintenance Procedures for the SRX550 High Memory Services Gateway
Copyright © 2016, Juniper Networks, Inc.
Required Tools and Parts for Maintaining the SRX550 High Memory Services Gateway
Hardware Components on page 143

Routine Maintenance Procedures for the SRX550 High Memory Services

Gateway on page 143

Maintaining the SRX550 High Memory Services Gateway Cooling System

Components on page 144
Maintaining the SRX550 High Memory Services Gateway Power Supply on page 144
The following tools and parts are required to maintain the hardware components of the
services gateway:
Electrostatic bag or antistatic mat
Electrostatic discharge (ESD) grounding wrist strap
Flat-blade screw-blade screwdriver, approximately 1/8 in. (3 mm)
Phillips (+) screwdrivers, number 1 and number 2
Routine Maintenance Procedures for the SRX550 High Memory Services Gateway on
page 143
Maintaining the SRX550 High Memory Services Gateway Cooling System Components
on page 144
Maintaining the SRX550 High Memory Services Gateway Power Supply on page 144
For optimum performance of the services gateway, perform the following preventive
maintenance procedures regularly:
Inspect the installation site for moisture, loose wires or cables, and excessive dust.
143