Gateway; Configuring Basic Connectivity Settings On The Srx100 Services Gateway; Configuring Basic Settings For The Srx100 Services Gateway With J-Web Quick Configuration - Juniper SRX100 Hardware Manual

6.
7.
Related Topics

Configuring Basic Connectivity Settings on the SRX100 Services Gateway

This topic includes the following sections:

Configuring Basic Settings for the SRX100 Services Gateway with J-Web Quick Configuration

J-Web Quick Configuration allows you to configure basic settings. Figure 15 on page
68 shows the Quick Configuration page for basic setup.
Chapter 12: Establishing Basic Connectivity for the SRX100 Services Gateway
An response verifies that the modem can communicate successfully with the
OK
COM port on the PC or laptop.
To dial the modem that is connected to the console port on the services gateway,
enter
ATDT remote-modem-number
connected to the console port on the services gateway is
.
ATDT 0013033033030
The services gateway login prompt appears.
Log in as the user root . No password is required at initial connection, but you
must assign a root password before committing any configuration settings.
Connecting the Modem at the SRX100 Services Gateway End on page 64
Connecting the Modem to the Console Port on the SRX100 Services Gateway on
page 65
Connecting an SRX100 Services Gateway to the CLI Locally on page 62
Connecting an SRX100 Services Gateway to the CLI Remotely on page 64
Configuring Basic Settings for the SRX100 Services Gateway with J-Web Quick
Configuration on page 67
Configuring Basic Settings for the SRX100 Services Gateway with a Configuration
Editor on page 70
Displaying Basic Connectivity Configurations for the SRX100 Services
Gateway on page 73
SRX100 Services Gateway Secure Web Access Overview on page 74
Configuring Basic Connectivity Settings on the SRX100 Services Gateway
. For example, if the number of the modem
0013033033030 , enter
67