A&D BA-T Series Instruction Manual page 93

Standard value setting
Display settings: MENU key
1 Sensitivity test button
2 Repeatability button
3 Eccentricity button
4 Back button
Name
Sensitivity test button
1
Repeatability button
2
Eccentricity button
3
Back button
4
Standard value setting: Repeatability
Display settings: MENU key
1 Measurement count
2 Tolerance (standard deviation)
3 Back button
Name
Measurement count
1
Tolerance (standard
2
deviation)
Back button
3
You can change the repeatability settings.
The settings in this screen are common to the repeatability settings screen for the periodic check.
Calibration test/check button
Standard value setting button
Displays the [Standard value setting: Sensitivity test] screen.
Displays the [Standard value setting: Repeatability] screen.
Displays the [Standard value setting: Eccentricity] screen.
Returns to the previous screen.
Calibration test/check button
Standard value setting button
[Standard value setting: Repeatability] screen
Set the measurement count.
Set the tolerance (standard deviation).
Returns to the previous screen.
[Standard value setting] screen
Description
Repeatability button
Description
93
Settings button
Settings button