A&D BA-T Series Instruction Manual page 138

Data communication software
WinCT (USB Virtual COM mode or RS-232C)
WinCT is data communication software for Windows that allows you to easily receive data on your
computer the weighing data of the balance. Use the Virtual COM mode via USB interface or the RS-
232C interface for the communication settings of the personal computer.
WinCT can be downloaded from our website http://www.aandd.jp.
For the installation and setup of WinCT, refer to "WinCT Setup Manual" and "WinCT Operation Manual "
on our website.
WinCT consists of three applications: "RsCom", "RsKey", and "RsWeight".
"RSCom"
Controls the balance by sending commands to the balance.
Displays the received data and saves it as a text file (.txt).
Communicates with multiple balances by performing multiple operations.
Runs at the same time as other applications. (Does not occupy the computer)
Receives the GLP compliant output data of the balance.
"RsKey"
Enters the weighing data of the balance directly into other applications.
Any type of application, such as Word or Excel, can be used as long as keyboard input is possible.
Inputs the GLP compliant output of the balance.
The test display function allows you to use your computer as an external display for the balance.
"RsWeight"
The received data can be graphed in real time.
The maximum value, minimum value, average value, standard deviation, fluctuation count, etc. of the
received data can be calculated and displayed.
WinCT-Plus (wired LAN)
WinCT-Plus is data communication software for Windows that allows you to easily receive data on your
computer the weighing data of the balance. Use the wired LAN interface, Virtual COM mode via USB
interface, or the RS-232C interface for the communication settings of the personal computer.
WinCT-Plus can be downloaded from our website http://www.aandd.jp.
For the installation and setup of WinCT-Plus, refer to the information about "WinCT-Plus" on our
website.
WinCT-Plus offers the application "RsMulti".
"RsMulti"
Sends data to a single personal computer from multiple weighing devices connected to the Ethernet
(LAN) for management.
You can connect up to 100 weighing devices. This may be restricted depending on the performance of
the personal computer or data retrieval frequency.
You can press the PRINT button on weighing devices to send data to the personal computer.
138