A&D BA-T Series Instruction Manual page 33

Counting mode (PCS)
If you configure this display, the HOME screen changes to Counting mode.
Display settings: HOME key
1 Counting mode display
2 Counting mode setting button
Name
1 Counting mode display Displayed in the Counting mode.
Counting mode setting
2
button
Counting mode usage
This is the mode to determine the number of objects in a sample. Based on the reference sample unit
weight (weight per piece), the balance calculates and displays how many pieces the sample weight
corresponds to. The smaller the variation in the unit weight of sample pieces is, the more accurate the
count will be. The balance is equipped with the Automatic Counting Accuracy Improvement (ACAI)
function to improve the counting accuracy.
* It is recommended that the unit weight (weight per piece) of the sample should be 0.1 mg or more.
* If there is a large variation in the unit weight of sample pieces, it may not be possible to count
accurately.
* If a large error is found in the counting measurement, try a method such as performing ACAI frequently
or multiple measurements.
APP button
Application selection button
HOME key Counting mode screen
Displays the [Counting mode setting] screen, where the stored unit weight is
displayed.
You can also change the unit weight.
[Application] settings screen
Select [Counting mode].
Description
33
3 Unit for counting