A&D BA-T Series Instruction Manual page 151

Commands to preset the tare value
Command
PT: .
g
?PT
Commands to control piece counting
Command
UW: . g
?UW
Commands to set time and date
Command
TM: : :
DT: / /
?TM
?DT
Commands to request other data
Command
?T
?ID
?SN
?TN
Sets the preset tare value.
Add the unit in the A&D standard format (3 characters).
If the display unit is PCS or percent (%), set the value in gram.
In the case of setting the preset tare value to 1.23456 g, the input will be
PT:1.23456 g .
Values exceeding the weighing capacity cannot be set. Negative values cannot be
set.
Requests the tare weight value.
Outputs the tare value set with the PT, T, or TR command.
Sets the unit weight value (weight of one piece).
Add the unit in the A&D standard format (3 characters).
In the case of setting the unit weight value to 1.23 g, the input will be
UW:1.23 g .
Values exceeding the weighing capacity cannot be set. Negative values cannot be
set.
Requests the unit weight value.
Sets time.
In the case of setting time to "twelve thirty-four fifty-six seconds", the input will be
TM:12:34:56 .
Do not set non-existing time values.
Sets date.
In the case of setting time to "January 23, 2020", the input will be DT:20/01/23 .
Do not set non-existing date values.
Requests the time.
Requests the date.
Requests the tare weight value. Outputs the tare value set with the T or TR
command.
Requests the ID number.
Requests the serial number.
Requests the device name.
Description
Description
Description
Description
151